PANAVISE 324 Electronic Work Center
Authеntіс Crаzу Dеаlѕ PANAVISE 324 Electronic Work Center A quick review
So you can check out the other reviews at Amazon.com
only with $ 99.99
- Includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station
- Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360
- Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place
- Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg)
From the manufacturer
Circuit Board Specific Holding Power
The Electronic Work Center is a work-holding tool combo designed for use in the assembly and repair of circuit boards. The tool consists of 4 PanaVise components: the Circuit Board Holder Head, Standard Base, Tray Base Mount and Soldering Station. The head has two horizontally adjustable arms that secure circuit boards up to 12" (304.8 mm) wide and 5/32" (4 mm) thick. The arms have "V" shaped grooves that securely hold edges. One of the arms also include a spring lever that allows for fast removal and placement of boards without having to loosen the arms via the knobs. The head also has an independent adjustment knob allowing the circuit boards to tilt to the most convenient angle. Pre-drilled holes, attach the Standard Base to the Tray Base Mount. The Tray Base Mount has 6 part wells with rounded edges to easily grab parts. The Solder Station includes a soldering iron holder, wire holder, nib sponges and mounting hardware. The two nib sponges are shaped to fit into the part wells.
 |
 |
 |
 |
|---|---|---|---|
Circuit Board Holder Arms & Cross BarThe arms are designed to be used with circuit boards up to 4 mm thick. The cross bar can be adjusted or replaced (replacement bars of different lengths and replacement arm sold separately). Cross Bar Knobs allow easy release for simple adjustments. The Quick Release Spring Tension Lever allows for easy placement and removal of boards. The "V" Notch at the top of both arms allows you to easily work with electrical components for wiring or soldering. | Standard BaseVersatile general purpose work-holding tool base suitable for small to medium sized projects such as arts, model making, electronics, jewelry making and home repairs. | Tray Base MountOrganizes your small parts in the 6 part wells. The rounded and sloped walls makes it easy to retrieve parts. This cast aluminum Base Mount adds stability. 6 non-marring, anti-skid pads prevent scratching on the work surface. Over all diameter of 8-7/16" (225.4 mm) Three pre-drilled and tapped 1/4"-20 holes to secure accessories. | Solder StationIncludes a wire soldering iron holder, a wire holder, two nib sponges with self-purging slits, and mounting hardware. |
Parts and Accessories
Electronic Work Center shown in use with:
22" Replacement Cross Bar (Model 318-22) sold separately
Circuit Board Holder Arms (Model 316) sold separately
Check out all the interchangeable vise heads, bases, bases mounts, and accessories.
Product Description
Product Description
Multi-Angle Vise, Base Type Stationary with Parts Tray, Jaw Width 5/16 In., Max. Opening 12 In., Throat Depth 6-3/16 In., Jaw Face Grooved, Jaw Material Steel, Material Cast Zinc, Swivel Angle 360 Degrees , Overall Length 18-5/16 In., Overall Width 8-7/16 In., Overall Height 13-9/16 In., Features Solder Station, Circuit Board Holder has Split-Ball Lock, Tilts 90 Deg, Turns 360 Deg and Rotates 360 Deg
From the Manufacturer
The PanaVise 324 electronic work center is a work-holding tool bundle designed for work with circuit boards and other electronic components. It features a head specifically designed to hold circuit boards up to 12", and a tray mount with six built-in parts wells and various soldering iron accessories. The components are mounted around a PanaVise 300 standard base. The base is compatible with additional tool and vise head options, and features PanaVise "split-ball" functionality utilizing single-knob controls for head movement through 3 separate planes (tilt, turn and rotate).
View larger.
Circuit Board Specific Holding Power
The PanaVise 324 electronic work center is a work-holding tool bundle designed for use in the assembly and repair of electronic circuit boards. The tool consists of four PanaVise components: the 315 circuit board holder, the 300 standard base, the 312 parts tray mount, and the 371 solder station kit. The 315 circuit board holder is a head component with a 5/8" stem diameter that attaches to the 300 standard base. The 315 circuit board holder has two horizontally-adjustable arms that secure circuit boards up to 12" wide and 5/32" (4 mm) thick. The arms have "V"-shaped grooves that securely hold circuit board edges. The right arm also includes a ratcheting lever that allows for fast removal and placement of the circuit boards without having to loosen the main grip of the holder arms. The 315 circuit board holder also has an independent adjustment knob above its shaft that allows a user to tilt circuit boards to the most convenient angle for soldering. With pre-drilled holes, the aluminum 312 parts tray mount can be attached to the 300 standard base. The 312 parts tray mount contains six integrated part wells with rounded edges that ease the grasping of parts. The 371 solder station kit includes a soldering iron holder, a controlled-feed solder/wire holder, two nib sponges with self-purging slits, and two mounting screws and nuts. The soldering iron holder and the solder/wire holder attach to the outer edge of the 312 parts tray mount with included screws. This allows a user to safely and conveniently house a soldering iron and solder material. The two nib sponges are shaped to fit into the part wells.
View larger.
View larger.
View larger.
Tilt, Turn and Rotate Functionality
The PanaVise 324 Electronic Work Center utilizes PanaVise single-knob "split-ball" functionality at the point of contact between its base and the circuit board holder. Once the circuit board is secured within the head, the split-ball system allows for maneuvering the board along three separate planes. The complete mobility range with the split-ball system is a 90-degree tilt to the side, along with either an angled rotation, or a level turn range of 360 degrees. The mobility range allows a user to rearrange circuit boards into any position. This eliminates the need to adjust the overall position of the work station, allows for fast alternating views between the solder and the component sides of circuit boards.
Additional Head Options
Although the PanaVise 324 Electronic Work Center is primarily intended for use with the included circuit board holder head attachment, it is also compatible with a range of other vise head accessories. The base works with all PanaVise 300 series vise heads, as well as the PV Jr. 203 head, or any other tool with a 5/8" diameter shaft.
Key Features
- Components specifically designed for circuit board assembly and repair
- Specialized head opens to 12" with arms notched with "V"-shaped grooves to securely hold the circuit board edges
- Parts tray mount attaches to base and contains six integrated parts wells with rounded and sloped walls for easy parts retrieval
- Contains soldering iron holder, controlled-feed solder/wire holder, two nib sponges with self-purging slits, and mounting screws and nuts
- Patented single-load control knob and exclusive split-ball feature lock the head into place
- Load control knob allows adjustment in three axes (90-degree tilt, 360-degree turn and 360-degree rotation)
- Compatible with all 300 series vise heads, or any 5/8" diameter shaft tool accessory (all sold separately)
Specifications
| Overall | 315 Circuit Board Head | 300 Standard Base | 312 Tray Base Mount | 371 Solder Station |
|---|---|---|---|---|
|
|
|
|
|
What's in the Box?
- PanaVise 300 standard base
- PanaVise 315 circuit board holder
- PanaVise 312 parts tray
- PanaVise 371 solder station (soldering iron holder, controlled-feed solder/wire holder, two nib sponges with self-purging slits and two mounting screws and nuts)
- Six non-marring, anti-skid pads
- User's manual and warranty information
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Specifications for this item
Rесеіvе Thе Sресіаl Prісе Hеrе : ☞☞
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut PANAVISE 324 Electronic Work CenterThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 90% fоr реорlе whо buу PANAVISE 324 Electronic Work Center рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "PANAVISE 324 Electronic Work Center"
Post a Comment